Stage 2 Vapor Recovery Hose Assembly

1. Standard: EN 1360/EN13483 2. Size: 5/8", 3/4", 7/8", 1" 3. W.P.: 16 bar 3. Usage: For stage 2 Vacuum Assist System

XFY Vapor Recovery Hose Assembly

    At present, the fittings of vapor recovery hose assembly and the return vapor part inside nozzle are sealed in the form of dynamic seal. Therefore, when refueling, the rotation of the nozzle brought the gasoline pumped back into the fuel dispenser along the vapor pipeline, this will cause the circulated vacuum pump scrapped and the gasoline station stopped. To this problem our company researched and developed a new type vapor recovery hose assembly, a good solution to the above-mentioned defects, so that the vapor recovery system became much more effective, safer and greener.

Construction:

1.Tube: NBR, no discolouration;

2.Cover: Chlorinated synthetic rubber; weather and oil resistant;

3. Reinforcement: One braided steel wire;

4. Vapor hose: Polyurethane, low diffusion. LT- flexible down to -40°c.

Temperature: -40°c up to 60°c

Reference Standard: EN1360/ EN13483

Size			Working  Pressure   (bar)	Test Pressure(bar)	Bend Radius(mm)
I.D. (inch)	I.D.(mm)	O.D.(mm)
3/4	19	30	16	24	100
7/8	21	31	16	24	100

We supply length and thread customized.

Stage 2 Vapor Recovery Hose Assembly